Effect of diisobutyl adipate on the expression of biomarker genes that respond to endocrine disruption and on gonadal sexual differentiation in Japanese medaka (Oryzias latipes).

Phthalate and non-phthalate plasticizers are used in polymer materials, such as plastic and rubber. It has recently been found that diisobutyl adipate (DIBA), which is considered an environmentally safe non-phthalate plasticizer, potentially acts as a thyroid disruptor in fish. Here, we investigated the sexual hormone effects of DIBA based on the expression levels of genes that respond to endocrine disruption and sexual hormone activity in the livers and gonads, and on gonadal sexual differentiation in Japanese medaka. Compared with the control group, the mRNA expression of chgH, vtg1, vtg2, and esr1 was significantly suppressed in the livers of DIBA exposed XX individuals. Furthermore, the mRNA expression of gsdf was significantly upregulated and downregulated in the gonads of XX and XY individuals, respectively. The mRNA expressions of esr1 and esr2b were significantly suppressed by DIBA exposure in the gonads of both XX and XY individuals. These observations suggest that DIBA has potential androgenic activity in Japanese medaka. However, normal testes and ovaries were observed in respective XY and XX medaka after DIBA exposure; therefore, these results suggest that DIBA may have weak androgenic activity.

Metabolic Engineering for Effective Synthesis of 2-Hydroxyadipate.

Adipic acid is an important monomer in the synthesis of nylon-6,6. In recent years, the biosynthesis of adipic acid has received more and more attention. The pathway with l-lysine as a precursor has potential for adipic acid synthesis, and 2-hydroxyadipate is a key intermediate metabolite in this pathway. In this Letter, the biosynthesis pathway of 2-hydroxyadipate was constructed in Escherichia coli. Through enhancement of precursor synthesis and cofactors regulation, 7.11 g/L of 2-hydroxyadipate was produced in the 5 L bioreactor, which verified the scale-up potential of 2-hydroxyadipate production. Furthermore, 11.1 g/L of 2-hydroxyadipate was produced in the 5 L bioreactor on the basis of potential optimization strategies via transcriptome analysis. This is the first time for the biosynthesis of 2-hydroxyadipate. The results lay a solid foundation for the biosynthesis of adipic acid and the production of bionylon.

[Metabolic engineering of Escherichia coli for adipic acid production].

Adipic acid is a high-value-added dicarboxylic acid which is primarily used in the production of nylon-66 for manufacturing polyurethane foam and polyester resins. At present, the biosynthesis of adipic acid is hampered by its low production efficiency. By introducing the key enzymes of adipic acid reverse degradation pathway into a succinic acid overproducing strain Escherichia coli FMME N-2, an engineered E. coli JL00 capable of producing 0.34 g/L adipic acid was constructed. Subsequently, the expression level of the rate-limiting enzyme was optimized and the adipic acid titer in shake-flask fermentation increased to 0.87 g/L. Moreover, the supply of precursors was balanced by a combinatorial strategy consisting of deletion of sucD, over-expression of acs, and mutation of lpd, and the adipic acid titer of the resulting E. coli JL12 increased to 1.51 g/L. Finally, the fermentation process was optimized in a 5 L fermenter. After 72 h fed-batch fermentation, adipic acid titer reached 22.3 g/L with a yield of 0.25 g/g and a productivity of 0.31 g/(L·h). This work may serve as a technical reference for the biosynthesis of various dicarboxylic acids.

Fate of a biodegradable plastic in forest soil: Dominant tree species and forest types drive changes in microbial community assembly, influence the composition of plastisphere, and affect poly(butylene succinate-co-adipate) degradation.

Poly(butylene succinate-co-adipate) (PBSA) degradation and its plastisphere microbiome in cropland soils have been studied; however, such knowledge is limited in the case of forest ecosystems. In this context, we investigated: i) the impact of forest types (conifer and broadleaved forests) on the plastisphere microbiome and its community assembly, ii) their link to PBSA degradation, and iii) the identities of potential microbial keystone taxa. We determined that forest type significantly affected microbial richness (F = 5.26-9.88, P = 0.034 to 0.006) and fungal community composition (R2 = 0.38, P = 0.001) of the plastisphere microbiome, whereas its effects on microbial abundance and bacterial community composition were not significant. The bacterial community was governed by stochastic processes (mainly homogenizing dispersal), whereas the fungal community was driven by both stochastic and deterministic processes (drift and homogeneous selection). The highest molar mass loss was found for PBSA degraded under Pinus sylvestris (26.6 ± 2.6 to 33.9 ± 1.8 % (mean ± SE) at 200 and 400 days, respectively), and the lowest molar mass loss was found under Picea abies (12.0 ± 1.6 to 16.0 ± 0.5 % (mean ± SE) at 200 and 400 days, respectively). Important fungal PBSA decomposers (Tetracladium) and atmospheric dinitrogen (N2)-fixing bacteria (symbiotic: Allorhizobium-Neorhizobium-Pararhizobium-Rhizobium and Methylobacterium and non-symbiotic: Mycobacterium) were identified as potential keystone taxa. The present study is among the first to determine the plastisphere microbiome and its community assembly processes associated with PBSA in forest ecosystems. We detected consistent biological patterns in the forest and cropland ecosystems, indicating a potential mechanistic interaction between N2-fixing bacteria and Tetracladium during PBSA biodegradation.

Understanding the mechanism of enhanced anaerobic biodegradation of biodegradable plastics after alkaline pretreatment.

Biodegradable plastics (BPs) tend to replace conventional plastics, which increases the amount of BP waste entering the environment. The anaerobic environment exists extensively in nature, and anaerobic digestion has become a widely used technique for organic waste treatment. Many kinds of BPs have low biodegradability (BD) and biodegradation rates under anaerobic condition due to the limitation of hydrolysis, so they still have harmful environmental consequences in anaerobic environment. There is an urgent need to find an intervention method to improve the biodegradation of BPs. Therefore, this study aimed to investigate the effectiveness of alkaline pretreatment in accelerating the thermophilic anaerobic degradation of ten widely used BPs, such as poly (lactic acid) (PLA), poly (butylene adipate-co-terephthalate) (PBAT), thermoplastic starch (TPS), poly (butylene succinate-co-butylene adipate) (PBSA), cellulose diacetate (CDA), etc. The results showed that NaOH pretreatment significantly improved the solubility of PBSA, PLA, poly (propylene carbonate) (PPC), and TPS. Except for PBAT, pretreatment with an appropriate NaOH concentration could improve the BD and degradation rate. The pretreatment also reduced the lag phase in the anaerobic degradation of BPs such as PLA, PPC, and TPS. Specifically, for CDA and PBSA, the BD increased from 4.6 % and 30.5 % to 85.2 % and 88.7 %, with increments of 1752.2 % and 190.8 %, respectively. Microbial analysis indicated that NaOH pretreatment promoted the dissolution and hydrolysis of PBSA and PLA and the deacetylation of CDA, which contributed to rapid and complete degradation. This work not only provides a promising method for improving the degradation of BP waste but also lays the foundation for its large-scale application and safe disposal.

Effects of plasticizer diisobutyl adipate on the Japanese medaka (Oryzias latipes) endocrine system.

Plasticizer pollution of the water environment is one of the world's most serious environmental issues. Phthalate plasticizers can disrupt endocrine function in vertebrates. Therefore, this study analyzed thyroid-related, reproduction-related, and estrogen-responsive genes in Japanese medaka (Oryzias latipes) to determine whether non-phthalate diisobutyl adipate (DIBA) plasticizer could affect endocrine hormone activity or not. Developmental toxicity during fish embryogenesis was also evaluated. At a concentration of 11.57 mg/l, embryonic exposure to DIBA increased the mortality rate. Although abnormal development, including body curvature, edema, and lack of swim bladder inflation, was observed at 3.54 and 11.57 mg/l DIBA, growth inhibition and reduced swimming performance were also observed. In addition, DIBA exposure increased the levels of thyroid-stimulating hormone beta-subunit (tshß) and deiodinase 1 (dio1) but decreased the levels of thyroid hormone receptor alpha (trα) and beta (trß). These results suggest that DIBA has thyroid hormone-disrupting activities in fish. However, kisspeptin (kiss1 and kiss2), gonadotropin-releasing hormone (gnrh1), follicle-stimulating hormone beta (fshß), luteinizing hormone beta (lhß), choriogenin H (chgH), and vitellogenin (vtg1) expression did not change dose-dependently in response to DIBA exposure, whereas gnrh2 and vtg2 expression was elevated. These results indicate that DIBA has low estrogenic activity and does not disrupt the endocrine reproduction system in fish. Overall, this is the first report indicating that non-phthalate DIBA plasticizer is embryotoxic and disrupt thyroid hormone activity in fish.

Metabolic engineering of Escherichia coli for adipic acid production / 生物工程学报

Adipic acid is a high-value-added dicarboxylic acid which is primarily used in the production of nylon-66 for manufacturing polyurethane foam and polyester resins. At present, the biosynthesis of adipic acid is hampered by its low production efficiency. By introducing the key enzymes of adipic acid reverse degradation pathway into a succinic acid overproducing strain Escherichia coli FMME N-2, an engineered E. coli JL00 capable of producing 0.34 g/L adipic acid was constructed. Subsequently, the expression level of the rate-limiting enzyme was optimized and the adipic acid titer in shake-flask fermentation increased to 0.87 g/L. Moreover, the supply of precursors was balanced by a combinatorial strategy consisting of deletion of sucD, over-expression of acs, and mutation of lpd, and the adipic acid titer of the resulting E. coli JL12 increased to 1.51 g/L. Finally, the fermentation process was optimized in a 5 L fermenter. After 72 h fed-batch fermentation, adipic acid titer reached 22.3 g/L with a yield of 0.25 g/g and a productivity of 0.31 g/(L·h). This work may serve as a technical reference for the biosynthesis of various dicarboxylic acids.

A facile process for adipic acid production in high yield by oxidation of 1,6-hexanediol using the resting cells of Gluconobacter oxydans.

BACKGROUND: Adipic acid (AA) is one of the most important industrial chemicals used mainly for the production of Nylon 6,6 but also for making polyurethanes, plasticizers, and unsaturated polyester resins, and more recently as a component in the biodegradable polyester poly(butylene adipate terephthalate) (PBAT). The main route for AA production utilizes benzene as feedstock and generates copious amounts of the greenhouse gas NO2. Hence, alternative clean production routes for AA from renewable bio-based feedstock are drawing increasing attention. We have earlier reported the potential of Gluconobacter oxydans cells to oxidize 1,6-hexanediol, a potentially biobased diol to AA. RESULTS: The present report involves a study on the effect of different parameters on the microbial transformation of 1,6-hexanediol to adipic acid, and subsequently testing the process on a larger lab scale for achieving maximal conversion and yield. Comparison of three wild-type strains of G. oxydans DSM50049, DSM2003, and DSM2343 for the whole-cell biotransformation of 10 g/L 1,6-hexanediol to adipic acid in batch mode at pH 7 and 30 °C led to the selection of G. oxydans DSM50049, which showed 100% conversion of the substrate with over 99% yield of adipic acid in 30 h. An increase in the concentrations of the substrate decreased the degree of conversion, while the product up to 25 g/L in batch and 40 g/L in fed-batch showed no inhibition on the conversion. Moreover, controlling the pH of the reaction at 5-5.5 was required for the cascade oxidation reactions to work. Cell recycling for the biotransformation resulted in a significant decrease in activity during the third cycle. Meanwhile, the fed-batch mode of transformation by intermittent addition of 1,6-hexanediol (30 g in total) in 1 L scale resulted in complete conversion with over 99% yield of adipic acid (approximately 37 g/L). The product was recovered in a pure form using downstream steps without the use of any solvent. CONCLUSION: A facile, efficient microbial process for oxidation of 1,6-hexanediol to adipic acid, having potential for scale up was demonstrated. The entire process is performed in aqueous medium at ambient temperatures with minimal greenhouse gas emissions. The enzymes involved in catalyzing the oxidation steps are currently being identified.

Directed Evolution of (R)-2-Hydroxyglutarate Dehydrogenase Improves 2-Oxoadipate Reduction by 2 Orders of Magnitude.

Pathway engineering is commonly employed to improve the production of various metabolites but may incur in bottlenecks due to the low catalytic activity of a particular reaction step. The reduction of 2-oxoadipate to (R)-2-hydroxyadipate is a key reaction in metabolic pathways that exploit 2-oxoadipate conversion via α-reduction to produce adipic acid, an industrially important platform chemical. Here, we engineered (R)-2-hydroxyglutarate dehydrogenase from Acidaminococcus fermentans (Hgdh) with the aim of improving 2-oxoadipate reduction. Using a combination of computational analysis, saturation mutagenesis, and random mutagenesis, three mutant variants with a 100-fold higher catalytic efficiency were obtained. As revealed by rational analysis of the mutations found in the variants, this improvement could be ascribed to a general synergistic effect where mutation A206V played a key role since it boosted the enzyme's activity by 4.8-fold. The Hgdh variants with increased activity toward 2-oxoadipate generated within this study pave the way for the bio-based production of adipic acid.

Sudden death of a 2-year-old child due to alpha-ketoadipic aciduria.

Alpha-ketoadipic acid is one of the metabolic intermediates of lysine and tryptophan, and it is known as the biochemical hallmark of alpha-ketoadipic aciduria (α-KA). α-KA is a rare autosomal recessive disorder. Its pathophysiology is reduced alpha-ketoadipic acid dehydrogenase activity, and that makes it difficult to metabolize lysine and tryptophan. The symptoms of this disease are multiple, e.g., psychomotor retardation, epilepsy, and ataxia, and it can even be asymptomatic. We present a case of sudden death in a 2-year-old boy with alpha-ketoadipic aciduria. Postmortem computed tomography (CT) and autopsy were performed to elucidate the cause of death. No obvious lesions could be identified except for a marked fatty liver. Urinalysis showed elevated excretion of α-ketoadipic acid.

Claisen Condensation Reaction Mediated Pimelate Biosynthesis via the Reverse Adipate-Degradation Pathway and Its Isoenzymes.

Pimelic acid is an important seven-carbon dicarboxylic acid, which is broadly applied in various fields. The industrial production of pimelic acid is mainly through a chemical method, which is complicated and environmentally unfriendly. Herein, we found that pimelic acid could be biosynthesized by the reverse adipate-degradation pathway (RADP), a typical Claisen condensation reaction that could be applied to the arrangement of C-C bond. In order to strengthen the supply of glutaryl-CoA precursor, PA5530 protein was used to transport glutaric acid. Subsequently, we discovered that the enzymes in the BIOZ pathway are isoenzyme of the RADP pathway enzymes. By combining the isoenzymes of the two pathways, the titer of pimelic acid reached 36.7 mg ⋅ L-1 under the optimal combination, which was increased by 382.9 % compared with the control strain B-3. It was also the highest titer of pimelic acid biosynthesized by Claisen condensation reaction, laying the foundation for the production of pimelic acid and its derivatives.

Rational orthologous pathway and biochemical process engineering for adipic acid production using Pseudomonas taiwanensis VLB120.

Microbial bioprocessing based on orthologous pathways constitutes a promising approach to replace traditional greenhouse gas- and energy-intensive production processes, e.g., for adipic acid (AA). We report the construction of a Pseudomonas taiwanensis strain able to efficiently convert cyclohexane to AA. For this purpose, a recently developed 6-hydroxyhexanoic acid (6HA) synthesis pathway was amended with alcohol and aldehyde dehydrogenases, for which different expression systems were tested. Thereby, genes originating from Acidovorax sp. CHX100 and the XylS/Pm regulatory system proved most efficient for the conversion of 6HA to AA as well as the overall cascade enabling an AA formation activity of up to 48.6 ± 0.2 U gCDW-1. The optimization of biotransformation conditions enabled 96% conversion of 10 mM cyclohexane with 100% AA yield. During recombinant gene expression, the avoidance of glucose limitation was found to be crucial to enable stable AA formation. The biotransformation was then scaled from shaking flask to a 1 L bioreactor scale, at which a maximal activity of 22.6 ± 0.2 U gCDW-1 and an AA titer of 10.2 g L-1 were achieved. The principal feasibility of product isolation was shown by the purification of 3.4 g AA to a purity of 96.1%. This study presents the efficient bioconversion of cyclohexane to AA by means of a single strain and thereby sets the basis for an environmentally benign production of AA and related polymers such as nylon 6,6.

The ß-ketoadipate pathway of Acinetobacter baumannii is involved in complement resistance and affects resistance against aromatic antibiotics.

Acinetobacter baumannii can thrive on a broad range of substrates such as sugars, alcohols, lipids, amino acids and aromatic compounds. The latter three are abundant in the human host and are potential candidates as carbon sources for the metabolic adaptation of A. baumannii to the human host. In this study we determined the biodegradative activities of A. baumannii AYE with monocyclic aromatic compounds. Deletion of genes encoding the key enzymes of the ß-ketoadipate pathway, the protocatechuate-3,4-dioxygenase (ΔpcaHG) and the catechol-1,2-dioxygenase (ΔcatA), led to a complete loss of growth on benzoate and p-hydroxybenzoate, suggesting that these substrates are metabolized via the two distinct branches (pca and cat) of this pathway. Furthermore, we investigated the potential role of these gene products in host adaptation by analyzing the capability of the mutants to resist complement-mediated killing. These studies revealed that the mutants exhibit a decreased complement resistance, but a dramatic increase in survival in normal human serum in the presence of p-hydroxybenzoate or protocatechuate. These results indicate that the ß-ketoadipate pathway plays a role in adaptation of A. baumannii to the human host. Moreover, the single and double mutants exhibited increased antibiotic resistances indicating a link between the two dioxygenases and antibiotic resistance.

Exploring functionality of the reverse ß-oxidation pathway in Corynebacterium glutamicum for production of adipic acid.

BACKGROUND: Adipic acid, a six-carbon platform chemical mainly used in nylon production, can be produced via reverse ß-oxidation in microbial systems. The advantages posed by Corynebacterium glutamicum as a model cell factory for implementing the pathway include: (1) availability of genetic tools, (2) excretion of succinate and acetate when the TCA cycle becomes overflown, (3) initiation of biosynthesis with succinyl-CoA and acetyl-CoA, and (4) established succinic acid production. Here, we implemented the reverse ß-oxidation pathway in C. glutamicum and assessed its functionality for adipic acid biosynthesis. RESULTS: To obtain a non-decarboxylative condensation product of acetyl-CoA and succinyl-CoA, and to subsequently remove CoA from the condensation product, we introduced heterologous 3-oxoadipyl-CoA thiolase and acyl-CoA thioesterase into C. glutamicum. No 3-oxoadipic acid could be detected in the cultivation broth, possibly due to its endogenous catabolism. To successfully biosynthesize and secrete 3-hydroxyadipic acid, 3-hydroxyadipyl-CoA dehydrogenase was introduced. Addition of 2,3-dehydroadipyl-CoA hydratase led to biosynthesis and excretion of trans-2-hexenedioic acid. Finally, trans-2-enoyl-CoA reductase was inserted to yield 37 µg/L of adipic acid. CONCLUSIONS: In the present study, we engineered the reverse ß-oxidation pathway in C. glutamicum and assessed its potential for producing adipic acid from glucose as starting material. The presence of adipic acid, albeit small amount, in the cultivation broth indicated that the synthetic genes were expressed and functional. Moreover, 2,3-dehydroadipyl-CoA hydratase and ß-ketoadipyl-CoA thiolase were determined as potential target for further improvement of the pathway.

Engineering the Reductive TCA Pathway to Dynamically Regulate the Biosynthesis of Adipic Acid in Escherichia coli.

Adipic acid is a versatile aliphatic dicarboxylic acid. It is applied mainly in the polymerization of nylon-6,6, which accounts for 50.8% of the global consumption market of adipic acid. The microbial production of adipic acid avoids the usage of petroleum resources and the emission of harmful nitrogen oxides that are generated by traditional chemical synthetic approaches. However, in the fermentation process, the low theoretical yield and the usage of expensive inducers hinders the large-scale industrial production of adipic acid. To overcome these challenges, we established an oxygen-dependent dynamic regulation (ODDR) system to control the expression of key genes (sucD, pyc, mdh, and frdABCD) that could be induced to enhance the metabolic flux of the reductive TCA pathway under anaerobic conditions. Coupling of the constitutively expressed adipic acid synthetic pathway not only avoids the use of inducers but also increases the theoretical yield by nearly 50%. After the gene combination and operon structure were optimized, the reaction catalyzed by frdABCD was found to be the rate-limiting step. Further optimizing the relative expression levels of sucD, pyc, and frdABCD improved the titer of adipic acid 41.62-fold compared to the control strain Mad1415, demonstrating the superior performance of our ODDR system.

Human metabolism and urinary excretion kinetics of di-n-butyl adipate (DnBA) after oral and dermal administration in three volunteers.

Di-n-butyl adipate (DnBA) is used as a plasticizer and in various consumer products (e.g. personal care products) replacing, in part, the endocrine disruptor di-n-butyl phthalate (DnBP). We provide quantitative in vivo data on human DnBA metabolism and excretion after oral dose (105-185 µg/kg bw) and dermal application to three volunteers each as a tool for exposure and risk assessment. Complete and consecutive urine samples were collected for two (oral) and four days (dermal), respectively, and analyzed for the metabolites mono-n-butyl adipate (MnBA), 3- and tentative 4-hydroxy-mono-n-butyl adipate (3OH-MnBA, 4OH-MnBA), and 3-carboxy-mono-n-propyl adipate (3cx-MnPrA), as well as the hydrolysis product adipic acid (AA) using stable isotope dilution quantification. Metabolites were excreted within 24 h after oral dose with one or two concentration maxima at 0.8-3.0 h (n = 3) and 4.8-6.3 h (n = 2). AA was the major but unspecific metabolite with urinary excretion fractions (FUEs) of 14-26 %. Mean FUEs (range) of 3cx-MnPrA, MnBA, 3OH-MnBA, and tentative 4OH-MnBA were low, but consistent between volunteers (0.47 % (0.35-0.63 %), 0.079 % (0.065-0.091 %), 0.012 % (0.006-0.016 %), and 0.005 % (0.002-0.009 %), respectively). MnBA and 3OH-MnBA seem to be suitable, specific exposure biomarkers for DnBA, whereas 3cx-MnPrA and 4OH-MnBA seem to originate also from other, unknown sources not related to DnBA. Compared to the oral study, metabolite excretion in the dermal study was delayed and MnBA excretion was somewhat higher compared to the oxidized metabolites. Based on urinary concentrations and the above excretion fractions, calculated uptakes in the dermal study did not exceed the adipate ester ADI of 5 mg/(kg bw*day).

α-proteobacteria synthesize biotin precursor pimeloyl-ACP using BioZ 3-ketoacyl-ACP synthase and lysine catabolism.

Pimelic acid, a seven carbon α,ω-dicarboxylic acid (heptanedioic acid), is known to provide seven of the ten biotin carbon atoms including all those of the valeryl side chain. Distinct pimelate synthesis pathways were recently elucidated in Escherichia coli and Bacillus subtilis where fatty acid synthesis plus dedicated biotin enzymes produce the pimelate moiety. In contrast, the α-proteobacteria which include important plant and mammalian pathogens plus plant symbionts, lack all of the known pimelate synthesis genes and instead encode bioZ genes. Here we report a pathway in which BioZ proteins catalyze a 3-ketoacyl-acyl carrier protein (ACP) synthase III-like reaction to produce pimeloyl-ACP with five of the seven pimelate carbon atoms being derived from glutaryl-CoA, an intermediate in lysine degradation. Agrobacterium tumefaciens strains either deleted for bioZ or which encode a BioZ active site mutant are biotin auxotrophs, as are strains defective in CaiB which catalyzes glutaryl-CoA synthesis from glutarate and succinyl-CoA.

Biosynthesis of adipic acid in metabolically engineered Saccharomyces cerevisiae.

Adipic Acid (AA) is a valued platform chemical compound, which can be used as a precursor of nylon-6,6. Due to the generation of an enormous amount of nitric oxide metabolites and the growing depletion of oil resources as a result of AA production from a mixture of cyclohexanol and cyclohexanone, the microbial methods for synthesizing AA have attracted significant attention. Of the several AA-producing pathways, the reverse adipate degradation pathway in Thermobifida fusca (Tfu RADP) is reported to be the most efficient, which has been confirmed in Escherichia coli. In this study, the heterologous Tfu RADP was constructed for producing AA in S. cerevisiae by co-expressing genes of Tfu_0875, Tfu_2399, Tfu_0067, Tfu_1647, Tfu_2576, and Tfu_2576. The AA titer combined with biomass, cofactors and other by-products was all determined after fermentation. During batch fermentation in a shake flask, the maximum AA titer was 3.83 mg/L, while the titer increased to 10.09 mg/L during fed-batch fermentation in a 5-L bioreactor after fermentation modification.

One-Pot Synthesis of Adipic Acid from Guaiacol in Escherichia coli.

Adipic acid is one of the most important small molecules in the modern chemical industry. However, the damaging environmental impact of the current industrial synthesis of adipic acid has necessitated the development of greener, biobased approaches to its manufacture. Herein we report the first one-pot synthesis of adipic acid from guaiacol, a lignin-derived feedstock, using genetically engineered whole-cells of Escherichia coli. The reaction is mild, efficient, requires no additional additives or reagents, and produces no byproducts. This study demonstrates how modern synthetic biology can be used to valorize abundant feedstocks into industrially relevant small molecules in living cells.

Computer-aided engineering of adipyl-CoA synthetase for enhancing adipic acid synthesis.

OBJECTIVE: To enhance adipic acid production, a computer-aided approach was employed to engineer the adipyl-CoA synthetase from Thermobifida fusca by combining sequence analysis, protein structure modeling, in silico site-directed mutagenesis, and molecular dynamics simulation. RESULTS: Two single mutants of T. fusca adipyl-CoA synthetase, E210ßN and E210ßQ, achieved a specific enzyme activity of 1.95 and 1.84 U/mg, respectively, which compared favorably with the 1.48 U/mg for the wild-type. The laboratory-level fermentation experiments showed that E210ßN and E210ßQ achieved a maximum adipic acid titer of 0.32 and 0.3 g/L. In contrast, the wild-type enzyme yielded a titer of 0.15 g/L under the same conditions. Molecular dynamics (MD) simulations revealed that the mutants (E210ßN and E210ßQ) could accelerate the dephosphorylation process in catalysis and enhance enzyme activity. CONCLUSIONS: The combined computational-experimental approach provides an effective strategy for enhancing enzymatic characteristics, and the mutants may find a useful application for producing adipic acid.